Designed to fit the 20L x 18”W entry points in oval tanks. The Saddle Vent was designed to let workers enter and exit a confined space quickly and safely, without the need to remove the ducting. The 8”-diameter ducting is attached from a blower to the top of the Saddle Vent or an optional 90° elbow. Another section of 8” ducting is attached to the bottom of the Saddle Vent and extends into the tank to provide fresh air and displace harmful gases.

The Saddle Vent was designed to let workers enter and exit a confined space quickly and safely, without the need to remove the ducting. The Conductive Saddle Vent is for use in hazardous locations where explosive hazards may exists. An electrical resistance reading between 30K and 300K ohms ensures that an electrical path is made for static electricity to safely discharge back to the blower and its grounded electrical connection.

Provide ventilation while allowing continuous access to the manhole for either entry or egress with vinyl Ducting and a Saddle Vent System (sold separately).

The Saddle Vent was designed to let workers enter and exit a confined space quickly and safely, without the need to remove the ducting. Its unique design allows the Saddle Vent to fit any size manhole opening without loss of air flow to the worker. The 8”-diameter ducting is attached from a blower to the top of the Saddle Vent or an optional 90° elbow. Another section of 8” ducting is attached to the bottom of the Saddle Vent and extends to the bottom of the manhole to provide fresh air and displace harmful gases.