Made from a flame-resistant Nomex IIIA exterior with a warm quilted Nomex lining. An ATPV of 48 cal/cm² meets Hazard Risk Category 4. Note: There is a 5 to 7 day lead time for this product.

Made from durable 13-oz FR cotton duck with an extremely high ATPV of 54.3 cal/cm², which meets Hazard Risk Category 4. A modacrylic FR quilt lining provides both protection and a high level of warmth in extreme cold temperatures. Note: Available in mid-January 2012. Reserve yours now.

Made from a soft and comfortable Ultra Soft with a Red Indura lining for warmth in moderate temperatures. An ATPV of 32 cal/cm² meets Hazard Risk Category 3.

An ATPV of 29.5 cal/cm² meets Hazard Risk Category 3. Rugged 6-oz Nomex IIIA is inherently flame resistant, which means that the material does not require any topical treatment and won’t lose any of its effectiveness when laundered. A 7-oz quilted FR modacrylic insulation provides warmth and more flame-resistant protection. 3M Scotchlite silver and yellow reflective stripes enhance visibility and safety. (Note: Overalls do not meet ANSI high-visibility standards.)

An ATPV of 29.5 cal/cm² meets Hazard Risk Category 3. Rugged 6-oz Nomex IIIA is inherently flame resistant, which means that the material does not require any topical treatment and won’t lose any of its effectiveness when laundered. Insulation made from FR cotton quilted to 7-oz modacrylic provides warmth and more flame-resistant protection. 3M Scotchlite silver and yellow reflective stripes enhance visibility and safety. (Note: Parka does not meet ANSI high-visibility standards.)

The stretchable Nomex fleece meets ASTM F1506 for flame resistance and NFPA 70E Hazard Risk Category 2 (HRC 2) with an ATPV of 9.7 cal/cm².

Lightweight 5.8-oz fleece offers warmth and also provides an ATPV of 9.7 cal/cm², which meets NFPA 70E Hazard Risk Category 2. It can be worn as a full balaclava with just the eyes exposed, as a hood with the entire face exposed, or as a neck gaiter.

Kevlar/Nomex blend rip-stop fabric adds durability to the seat and knees. Exxtreme Pants are made from comfortable and warm Nomex IIIA fleece. The fleece has 40% less air permeability than similar FR fleece. It provides inherent flame resistance, as well as extreme warmth and breathability. Full side zippers make Exxtreme Pants easy to put on and off.

The 9.5-oz modacrylic soft rib knit is warm and comfortable, but also has an ATPV of 11.6 cal/cm² which meets NFPA 70E Hazard Risk Category 2. Meets ASTM F1506. Versatile and can be worn over the head, around the neck, or as a face covering.

A soft rib knit modacrylic provides added warmth and has an ATPV of 11.6 cal/cm², which meets Hazard Risk Category 2. Meets NFPA 70E and ASTM F1506.

Inherently flame-resistant rib knit is warm and comfortable but also provides an ATPV of 11.6 cal/cm², which meets Hazard Risk Category 2. Meets NFPA 70E and ASTM F1506.

Made from a cotton FR-treated outer shell (ATPV of 7.2 cal/cm²) with a Nomex®/Kevlar® blend liner (ATPV of 17.3 cal/cm²). The liner meets NFPA 70E (Hazard Risk Category 2) and ASTM F1506.

Made from antipilling Nomex IIIA fleece with a double layer in the ear band for added warmth. The snug fitting Double-Shot Hat can easily be worn under a hard hat.

Comfortable Nomex fleece for a combination of both warmth and arc flash protection. A Durable Water Repellent (DWR) finish ensures that water beads up and rolls off of the Vest, eliminating saturation.

Comfortable Nomex fleece for a combination of both warmth and arc flash protection. A Durable Water Repellent (DWR) finish ensures that water beads up and rolls off of the Vest, eliminating saturation.

Made from a dense antipilling Nomex IIIA fleece that has a high level of wind resistance, and has 40% less air permeability than similar FR fleece. The three-panel hood makes the Sweatshirt easy to wear with hard hat.

Comfortable Nomex fleece for a combination of both warmth and arc flash protection. A Durable Water Repellent (DWR) finish ensures that water beads up and rolls off of the Sweatshirt, eliminating saturation. Features an attached drawstring hood and a plastic zipper front for easy donning.

Comfortable Nomex fleece for a combination of both warmth and arc flash protection. A Durable Water Repellent (DWR) finish ensures that water beads up and rolls off of the Sweatshirt, eliminating saturation. Features an attached drawstring hood and a plastic zipper front for easy donning.

Made from Polartec® Power Shield®, which is a four-way stretch water-repellent fabric with a breathable FR membrane that blocks 98% of wind. The breathability of the Power Shield material helps moisture escape and is ideal for use during strenuous activity. Attaches easily to a Dragon Shield Soft Shell Jacket (sold separately) with a YKK flame-resistant zipper.

A comfortable T-Shirt made from a modacrylic/cotton blend that provides an ATPV of 9.8 cal/cm², which meets Hazard Risk Category 2. Ideal for use as a base layer. Note: Available in mid-January 2012. Reserve yours now.

Insulated with an Indura FR quilted lining, which keeps the wearer warm and helps the Coveralls provide an ATPV rating of 11.5 cal/cm², which meets HRC (Hazard Risk Category) 2 requirements. Note: There is a 5 to 6 week lead time for all Neese outerwear.

Insulated with an Indura FR quilted lining, which keeps the wearer warm and helps the Coveralls provide an ATPV rating of 11.5 cal/cm², which meets HRC (Hazard Risk Category) 2 requirements. Note: There is a 5 to 6 week lead time for all Neese outerwear.

Insulated with an Indura FR quilted lining, which keeps the wearer warm and helps the Overalls provide an ATPV rating of 11.5 cal/cm², which meets HRC (Hazard Risk Category) 2 requirements. Note: There is a 5 to 6 week lead time for all Neese outerwear.

Insulated with an Indura FR quilted lining, which keeps the wearer warm and helps the Overalls provide an ATPV rating of 11.5 cal/cm², which meets HRC (Hazard Risk Category) 2 requirements. Note: There is a 5 to 6 week lead time for all Neese outerwear.

Made from Polartec® Power Shield®, which is a four-way stretch water-repellent fabric with a breathable FR membrane that blocks 98% of wind. The breathability of the Power Shield material helps moisture escape and is ideal for use during strenuous activity. Nomex/Kevlar® rip-stop fabric reinforces high wear areas.

Made from a dense antipilling Nomex IIIA fleece that has a high level of wind resistance, and has 40% less air permeability than similar FR fleece jackets. The Alpha provides inherent flame resistance, as well as extreme warmth and breathability.

Kevlar/Nomex blend rip-stop fabric adds durability to the shoulders and forearms. The rest of the Exxtreme Jacket is made from comfortable and warm Nomex IIIA fleece. The fleece has 40% less air permeability than similar FR fleece jackets. It provides inherent flame resistance, as well as extreme warmth and breathability.

Kevlar/Nomex blend rip-stop fabric adds durability to the shoulders and forearms. The rest of the Exxtreme Jacket is made from comfortable and warm Nomex IIIA fleece. The fleece has 40% less air permeability than similar FR fleece jackets. It provides inherent flame resistance, as well as extreme warmth and breathability. Slightly longer in the arms and torso to fit taller workers.

Comfortable Nomex fleece for a combination of both warmth and arc flash protection. Reinforced Nomex on the elbows and chest for added toughness. A Durable Water Repellent (DWR) finish ensures that water beads up and rolls off of the Jacket, eliminating saturation.

Comfortable Nomex fleece for a combination of both warmth and arc flash protection. Reinforced Nomex on the elbows and chest for added toughness. A Durable Water Repellent (DWR) finish ensures that water beads up and rolls off of the Jacket, eliminating saturation.

Made from Polartec® Power Shield®, which is a four-way stretch water-repellent fabric with a breathable FR membrane that blocks 98% of wind. The breathability of the Power Shield material helps moisture escape and is ideal for use during strenuous activity. Nomex/Kevlar® rip-stop fabric reinforces high wear areas.

A 70% modacrylic/30% viscose blend is inherently flame resistant. It also has the unique ability to keep the body from becoming too hot or too cold. FR Control utilizes Thermocules®, phase change microcapsules which have the ability to store heat. In warm conditions heat is absorbed into the Thermocules. When the body cools, the stored energy is released back to the body, providing warmth. The result is comfort in both cool and warm environments.

Power Grid four-way stretch fabric is comfortable and allows a wide range of motion. A jersey microfiber exterior enhances moisture wicking, while a unique interior grid pattern in the fabric maximizes warmth without adding bulk and weight. It also channels moisture away, for added comfort.

A 70% modacrylic/30% viscose blend is inherently flame resistant. It also has the unique ability to keep the body from becoming too hot or too cold. FR Control utilizes Thermocules®, phase change microcapsules which have the ability to store heat. In warm conditions heat is absorbed into the Thermocules. When the body cools, the stored energy is released back to the body, providing warmth. The result is comfort in both cool and warm environments.

A 70% modacrylic/30% viscose blend is inherently flame resistant. It also has the unique ability to keep the body from becoming too hot or too cold. FR Control utilizes Thermocules®, phase change microcapsules which have the ability to store heat. In warm conditions heat is absorbed into the Thermocules. When the body cools, the stored energy is released back to the body, providing warmth. The result is comfort in both cool and warm environments.

Rugged 6-oz Nomex IIIA is inherently flame resistant, which means that the material does not require any topical treatment and won’t lose any of its effectiveness when laundered. 3M Scotchlite silver and yellow reflective stripes enhance visibility and safety. (Note: Coveralls do not meet ANSI high-visibility standards

Tall sizes are 2” longer to accommodate bigger workers. Rugged 6-oz Nomex IIIA is inherently flame resistant, which means that the material does not require any topical treatment and won’t lose any of its effectiveness when laundered. 3M Scotchlite silver and yellow reflective stripes enhance visibility and safety. (Note: Coveralls do not meet ANSI high-visibility standards.

Insulated with an Indura® FR quilted lining, which keeps the wearer warm and helps the Coveralls provide an ATPV rating of 4.6 cal/cm², which meets HRC (Hazard Risk Category) 1 requirements. Note: There is a 5 to 6 week lead time for all Neese outerwear.

Insulated with an Indura® FR quilted lining, which keeps the wearer warm and helps the Coveralls provide an ATPV rating of 4.6 cal/cm², which meets HRC (Hazard Risk Category) 1 requirements. Note: There is a 5 to 6 week lead time for all Neese outerwear.

A two-piece liner that features an FR cotton upper beanie cap (ATPV of 7.2 cal/cm²) and a lower 18-oz modacrylic soft rib knit shroud (ATPV of 28.6 cal/cm²). The cap and shroud attach together with a Nomex® zipper which allows for the shroud to be removed when it’s not needed. Meets NFPA 70E and ASTM F1506.

Insulated with an Indura® FR quilted lining, which keeps the wearer warm and helps the Overalls provide an ATPV rating of 4.6 cal/cm², which meets HRC (Hazard Risk Category) 1 requirements. Note: There is a 5 to 6 week lead time for all Neese outerwear.

Insulated with an Indura® FR quilted lining, which keeps the wearer warm and helps the Overalls provide an ATPV rating of 4.6 cal/cm², which meets HRC (Hazard Risk Category) 1 requirements. Note: There is a 5 to 6 week lead time for all Neese outerwear.

Power Grid four-way stretch fabric is comfortable and allows a wide range of motion. A jersey microfiber exterior enhances moisture wicking, while a unique interior grid pattern in the fabric maximizes warmth without adding bulk and weight. It also channels moisture away, for added comfort.

Power Grid four-way stretch fabric is comfortable and allows a wide range of motion. A jersey microfiber exterior enhances moisture wicking, while a unique interior grid pattern in the fabric maximizes warmth without adding bulk and weight. It also channels moisture away, for added comfort.